Electric Sightseeing Car to extend the life of batteries and motors

Electric Sightseeing Car can be used for patrols. Sightseeing Bus chargers contain high-voltage circuits. Do not disassemble them without authorization. When charging Electric Sightseeing Car, do not cover the charger with anything. Place it in a ventilated place. At the same time, pay attention to prevent liquids and metal particles from entering the Sightseeing Bus charger, and prevent falling and collision to avoid damage.

And Electric Sightseeing Car need professional personnel to drive, not only for their own safety but also as a protection for the vehicle. Note that patrol officers must turn off the power of the car when temporarily parking on the street to prevent accidents.

Before using Electric Sightseeing Car, you should check whether the vehicle is in good condition, such as whether the tire pressure of the Sightseeing Bus is sufficient, whether the front and rear brakes are sensitive, whether there are any abnormalities in the vehicle, whether the screws are loose, and whether the battery is fully charged. When the Sightseeing Bus is just started, it should be accelerated slowly to avoid instantaneous acceleration and damage to components.

Pedal assistance should be used when starting and climbing Electric Sightseeing Car. Under the premise of ensuring safety, frequent braking and starting should be minimized during driving to save energy. When charging Electric Sightseeing Car, you should be careful not to use chargers of other brands. The performance of each brand of charger matches the battery, and only dedicated chargers can achieve the charging effect.