How to drive an Electric Sightseeing Car?

2024,11,16

Nowadays, Sightseeing Bus can be seen in many scenic spots or high-speed rail stations. Perhaps many friends think that it must be very simple to operate and think they can get started. In fact, it is like an embroidery needle. It looks simple but not easy to get started.

Although the driving threshold is low and no driver's license is required, it is still a little difficult for novices. After all, novices don't know much about the driving performance, clutch, brakes, etc. of the vehicle. It is not easy to drive without training. Therefore, in order to enable some novices to drive Sightseeing Bus more skillfully, the following will share with you some basic procedures for how to operate Sightseeing Bus.

(I) Precautions for driving a sightseeing car with a transmission

1. First, insert the key into the power switch and turn it to the ON position. This is similar to the ladies' Electric Sightseeing Car and is easy to understand.

2. Press the green part of the direction selection switch to the forward position.

3. Release the parking brake, step on the clutch pedal, adjust the gear lever to the low speed gear (1st or 2nd gear), release the clutch, and evenly step on the accelerator pedal to start the car.

4. When parking, release the accelerator pedal, slowly press the brake pedal, and after the vehicle stops, pull the parking brake.

(II) Precautions for driving an Sightseeing Bus without a transmission

1. Insert the key into the power lock switch and turn it to the ON position.

2. Press the green part of the direction selector switch to the forward position.

3. Release the parking brake and evenly press the accelerator pedal to start the vehicle. The lower the accelerator pedal is pressed, the higher the vehicle speed will be.

4. When parking, release the accelerator pedal, slowly press the brake pedal, and after the vehicle stops, pull the parking brake.

Author:

Mr. linlicar

E-mail:

987147613@qq.com

Phone/WhatsApp:

18008393466