How to extend the life of Electric Sightseeing Car batteries?

In recent years, the great development of the tourism industry has also led to the rise of the Electric Sightseeing Car industry. We have seen more and more that in order to facilitate customers, various electric tourist Sightseeing Bus have been installed in major tourist attractions. Sightseeing Bus have become a good assistant for customers in tourist attractions to travel and enjoy the scenery with their green and economic advantages. A few days ago, a friend asked how to extend the life of Electric Sightseeing Car batteries. Let's take a look.

1. Electric Sightseeing Car battery quality accidents, because the battery manufacturers, application materials, and processing technologies are different, the quality of the battery is also different, so try to use well-known brands, stable characteristics, and users evaluate the quality of products.

2. Tourist areas and large and medium-sized amusement parks have high-load rides during peak seasons. Some tourist attractions also have complex traffic conditions and large slopes. These are all caused by long-term high-load rides on electric sightseeing buses, but overloaded riding consumes a lot of battery capacity and the charging and discharging frequency is too high. However, if the battery charging and discharging frequency exceeds the necessary level, it will be exhausted.

3. Insufficient charging time. Sightseeing Bus often need to charge the battery during normal use. Some of them are not fully charged immediately during the charging process due to various reasons, which causes great damage to the battery. Because the battery is not fully charged, the internal electro-hydraulic exothermic reaction may not be sufficient, and the lead sulfate on the parallel plate capacitor cannot be fully recovered, which immediately leads to a decrease in capacitance and a similar decrease in life.

4. In the mixed application of new and old batteries, customers feel that some batteries are still usable when they are disassembled and replaced, so they throw them away. However, compared with the new mixed application, they still said that the new and old mixed applications use electricity quickly, resulting in increased energy consumption and low application rate. Together, they increase the frequency of charging, resulting in the whole set of batteries not being used for long and being unusable.

5. High battery charging. Some customers often use up the battery capacity before charging when using Sightseeing Bus. In this way, the oxygen caused by the positive electrode will exceed the absorption of the negative electrode, resulting in an increase in the wind pressure in the battery. The bubbles generated by overcharging will hit the parallel plate capacitor, causing specific organic matter to soften and fall off, which together cause the battery to be severely dehydrated, resulting in a reduction in volume and cannot be repaired.