Requirements of Electric Sightseeing Car for batteries

The source of electric energy for Electric Sightseeing Car is their batteries. In order to increase the driving range of Electric Sightseeing Car, the capacity of the battery must be large enough. However, increasing the capacity of the battery will increase the volume and mass of the battery pack, which will affect the power and layout of the vehicle. Therefore, Electric Sightseeing Car need to select batteries according to the design goals of Electric Sightseeing Car and different road driving conditions. The specific requirements are summarized as follows.

1. The capacity of the battery must be large enough to meet the design goals of the Sightseeing Bus driving range. In addition, the capacity and energy of the battery should ensure the power supply capacity of the vehicle under specific working conditions.

2. The battery can be deeply discharged without affecting its life. It is required that the battery of Electric Sightseeing Car can work under full load and achieve full discharge when necessary.

3. The specific energy and energy density of the battery should be as large as possible to reduce the structural size of the battery pack, reduce the mass of the battery pack, facilitate the overall structural design of the vehicle, and ensure the power and passenger space of the Sightseeing Bus.

4. The acceptable charging current of the battery should be large. For Electric Sightseeing Car with braking energy feedback systems, the battery is also required to have a large acceptable charging current and be able to accept pulse current charging of up to 5C in a short period of time, which helps to improve the efficiency of the vehicle's braking energy recovery.