As we all know, when using
Electric Sightseeing Car, you will encounter the situation where the car has no power, and naturally you will encounter the time when the
Sightseeing Bus needs to be charged. Compared with ordinary Electric Sightseeing Car, Electric Sightseeing Car are similar, but there are still some key points that need to be paid attention to in daily life:
1. Turn off the ignition lock after the Sightseeing Bus is put into storage.
2. Open the seat cover and battery cover.
3. Separate the controller output plug from the battery input plug, and unplug the charger input plug from the battery output plug.
4. Unplug the three-phase plug of the charger output end from the 220-volt power socket.
5. Turn on the charger switch to the ON position, then the power light of the Sightseeing Bus charger will be displayed, the digital display will scroll, and the fan will rotate.
6. After full charging, the charger full charge light will be displayed, and the charger switch will be turned off.
7. Check the electrolyte level of every three cells of each battery of the Sightseeing Bus. If any cell is short of electrolyte, add distilled water to the cell until the liquid level can be seen. Then turn on the charger switch to the ON position and charge for 1~2 hours. Turn off the charger switch to the OFF position. If there is no water shortage, follow step 8.
8. Unplug the three-phase plug at the charger output end.
9. Unplug the charger input end plug and plug the battery charging plug into the controller plug.
10. Fasten the battery cover and seat cover of the Sightseeing Bus.