How much do you know about the maintenance of Golf Cart?

2025,03,11

Some chassis machinery can be said to dominate the lifeblood of the entire Lithium Golf Carts. Some friends may say that it should not be so serious. For vehicles like Di Adong Golf Cart, we don’t seem to know much about these vehicles. For example, if the transmission clutch or brake system fails, it will seriously threaten people’s life safety. Today, let’s introduce the maintenance of Golf Cart!

1. First of all, the front wheel toe adjustment refers to the gap between the front and rear tires of the car and the level of the front tires or rear tires, and the gap difference between the front and rear of the front tires. When you share the adjustment of the front wheel toe beam with you, you will first see the front wheel of the simple front wheel. The following is the adjustment method.

1. Turn to the midpoint to make the Lithium Golf Carts drive straight;

2. Keep the tire pressure normal;

3. Adjust the length of the left and right crossbars;

4. Check whether there is damage to the cantilever ball in front;

5. Regularly maintain the fasteners of each access point of the front axle assembly to see if they fall off.

6. Golf Cart need to check whether the front spring rubber pad and plug-in rubber sleeve are damaged, and disassemble and replace them if necessary.

2. Common faults and repairs of rear axle

1. The tooth marks of active bevel gear are inconsistent with the tooth surface clearance, gear damage and excessive damage of rolling bearing will produce abnormal noise.

2. The preload of rolling bearing is too large, the meshing clearance of gear is too small, the tooth gap is wrong, and there is a lack of industrial lubricating oil, which will cause abnormal heating and should be cleared before leaving the car.

3. Check the tightness of each access point frequently. If an accident occurs, tighten it immediately to avoid accidents.

4. Check frequently whether there is industrial lubricant leakage into the position, if so, it should be cleared immediately.

5. Clean the soil outside the ventilation plug frequently to keep the pores unobstructed. Check the amount of industrial lubricating oil frequently, and do not exceed or lack oil.

Author:

Mr. linlicar

E-mail:

987147613@qq.com

Phone/WhatsApp:

18008393466